90 degree station tracks & flying trains

Talk about all things related to Railroads! here
Post Reply
User avatar
TheWizardKs
Posts: 27
Joined: Tue Jul 31, 2007 7:27 am

90 degree station tracks & flying trains

Post by TheWizardKs » Wed Aug 01, 2007 8:10 am

90 degree station tracks & flying trains

This may be old news, but I found a way to make station tracks intersect at 90 degrees thereby allowing traffic from 4 directions to come in and out. Screenshot collage below.
Note the upper left pic, that is a flying loco! I watched it zoom in from Heaven (or somewhere in the clouds) down onto the tracks.

[img=http://img341.imageshack.us/img341/5581 ... en1.th.png]

snoopy55
Posts: 1962
Joined: Mon Nov 06, 2006 5:13 am
Location: Centralia, Ill, USA

Post by snoopy55 » Wed Aug 01, 2007 9:48 am

Neat!!!!1 :twisted:

The flying Loco has been seen , usually when you make some major change to trackage or route orders :twisted: :twisted:

As to the crossing of the Station tracks, never thought to try that. If you can get them to where they don't intersect a station or other building, then they could be possible, and then put in a connection between them, a curve. I would almost guess it has been done in the real world more than once, so why not here :twisted: :twisted: :twisted:

Good going :!: :!: :twisted:
I'm correct 97% of the time..... who cares about the other 4%....

User avatar
pherschel
Posts: 14
Joined: Fri Jun 15, 2007 9:23 pm

Post by pherschel » Wed Aug 01, 2007 11:54 pm

You can get 90 deg track by running one thru a signal. Stop if a bridge forms and move back a bit, then click. Then stop laying track. start laying again, but start at the point you just ran accross.

chips2481
Posts: 56
Joined: Tue Apr 03, 2007 11:07 am

Post by chips2481 » Sun Aug 05, 2007 8:32 am

That is called track crossing in multi player and alot of people do it. I have seen some other stuff with a lot of tracks like a train just floating across the screen and not going to the stations at all!
p5n32-sli deluxe
pentium d 950 ES w/ HT OC to 4.0
2 gig corsair 5400ul 3-3-2-8
550 watt antec neo
antec p180 case
Quadro Plex VCS

chips2481
Posts: 56
Joined: Tue Apr 03, 2007 11:07 am

Post by chips2481 » Sun Aug 05, 2007 8:34 am

oh I see now you have station tracks crossed. Can you post a save file?
p5n32-sli deluxe
pentium d 950 ES w/ HT OC to 4.0
2 gig corsair 5400ul 3-3-2-8
550 watt antec neo
antec p180 case
Quadro Plex VCS

User avatar
TheWizardKs
Posts: 27
Joined: Tue Jul 31, 2007 7:27 am

Post by TheWizardKs » Tue Aug 07, 2007 6:08 pm

oh I see now you have station tracks crossed. Can you post a save file?
Very easy to do really, just make a second track come in at the angle you wish and when near the station, make it straight. May take some 'temp' track to get this done. Then make a double track from the straight piece you just laid down. Not always, but most of the time you will get station tracks. Delete or clean up the 'temp' tracks and haul your cargo.

Post Reply