This code comes from industries
i don't understand the code,
what can i do with it or change to have maybe more control or different settings and or control
<EventCodes>
<!-- Build Up -->
<BuildUp1To2>12</BuildUp1To2>
<BuildUp2To3>23</BuildUp2To3>
<!-- Level Layer -->
<Default1>101</Default1>
<Ambient1A>111</Ambient1A>
<BuildDecay2To1>21</BuildDecay2To1>
<Default2>201</Default2>
<Ambient2A>211</Ambient2A>
<BuildDecay3To2>32</BuildDecay3To2>
<Default3>301</Default3>
<Ambient3A>311</Ambient3A>
<!-- Stockpile Layer -->
<!-- NOTE: Ambients are used in BuildUp as well -->
<StockpileAmbient0>1000</StockpileAmbient0>
<StockpileUp0To1>1010</StockpileUp0To1>
<StockpileAmbient1>1100</StockpileAmbient1>
<StockpileDown1To0>1110</StockpileDown1To0>
<StockpileUp1To2>1120</StockpileUp1To2>
<StockpileAmbient2>1200</StockpileAmbient2>
<StockpileDown2To1>1210</StockpileDown2To1>
<StockpileUp2To3>1220</StockpileUp2To3>
<StockpileAmbient3>1300</StockpileAmbient3>
<StockpileDown3To2>1310</StockpileDown3To2>
<StockpileUp3To4>1320</StockpileUp3To4>
<StockpileAmbient4>1400</StockpileAmbient4>
<StockpileDown4To3>1410</StockpileDown4To3>
<StockpileUp4To5>1420</StockpileUp4To5>
<StockpileAmbient5>1500</StockpileAmbient5>
<StockpileDown5To4>1510</StockpileDown5To4>
<!-- Working Layer -->
<WorkingA>121</WorkingA>
<WorkingB>221</WorkingB>
<WorkingC>321</WorkingC>
<!-- Extra Layer -->
<ExtraAction1>501</ExtraAction1>
<ExtraAction2>502</ExtraAction2>
<ExtraAction3>503</ExtraAction3>
</EventCodes>
*********
also this comming from fe grain farm
<iCost>-1</iCost>
**********
can i change the fscale of cities, just like with industries?
I found the answer: It is NO because it is controlled by the setting iSize
where <i> stands for integer => so not possible to change to 0.2 wich is a float, still you can enlarge the number and set it to 10, i guess
(who said that the memory handled by SMR is bad done, they we're reducing here memory
*********
so if isize controls the greencirckel what is
<InfluenceRadius>450.0</InfluenceRadius> then,
i don't see any changes either setting it to 100?
What does this code mean? (a pile of questions) PLZ HELP?
What does this code mean? (a pile of questions) PLZ HELP?
Last edited by gforce on Mon Feb 19, 2007 11:46 pm, edited 2 times in total.
i'm playing with the bridges.xml
but i really can't make this work:
< nYearStart>1830</nYearStart>
< nYearEnd>1900</nYearEnd>
for one specific bridge
this doesn't work either
< nYearStart>0</nYearStart>
< nYearEnd>10</nYearEnd>
when i've got only 1 bridge defined, he will be using that one without problems but fromon i've got 2 different bridges he will not show any bridges more, never, nothing, aaaaaaaaaaaaah....
but i really can't make this work:
< nYearStart>1830</nYearStart>
< nYearEnd>1900</nYearEnd>
for one specific bridge
this doesn't work either
< nYearStart>0</nYearStart>
< nYearEnd>10</nYearEnd>
when i've got only 1 bridge defined, he will be using that one without problems but fromon i've got 2 different bridges he will not show any bridges more, never, nothing, aaaaaaaaaaaaah....