Ports in the cities?

Discuss maps, trains and other modding topics
Post Reply
User avatar
Jancsika
Posts: 921
Joined: Thu Nov 02, 2006 3:40 pm
Location: Maryland

Ports in the cities?

Post by Jancsika » Thu Mar 12, 2009 6:57 pm

Has anybody come up yet with a port in the city, that will stay put?
If you place a port in a city with <bIsCoastal>1</bIsCoastal> in the XML it will always either jump on the land or places the city houses in the water.
I know I can place it as a separate item but that will require an other trainstop, and that's what I want to aviod.
Jancsika

User avatar
Rodea2007
Posts: 482
Joined: Mon Jun 11, 2007 3:58 am
Location: Jakarta, Indonesia
Contact:

Re: Ports in the cities?

Post by Rodea2007 » Fri Mar 13, 2009 12:20 am

Jancsika wrote:Has anybody come up yet with a port in the city, that will stay put?
If you place a port in a city with <bIsCoastal>1</bIsCoastal> in the XML it will always either jump on the land or places the city houses in the water.
I know I can place it as a separate item but that will require an other trainstop, and that's what I want to aviod.
Jancsika
If you want to place a port in a city, so you can't make <bIsCoastal>1</bIsCoastal> and should be <bIsCoastal>0</bIsCoastal> and <bInCity>1</bInCity>
Rodea2007 ( http://rodea2007.yolasite.com )
Facebook http://www.facebook.com/rodea2007
Note Book TOSHIBA SATELLITE L645
Processor Inter Core I-3
Memory 8 GB
Harddisk 320 GB
Windows 7 Ultimate 64 Bit

User avatar
Jancsika
Posts: 921
Joined: Thu Nov 02, 2006 3:40 pm
Location: Maryland

Re: Ports in the cities?

Post by Jancsika » Fri Mar 13, 2009 3:28 am

:mrgreen:
If you want to place a port in a city, so you can't make <bIsCoastal>1</bIsCoastal> and should be <bIsCoastal>0</bIsCoastal> and <bInCity>1</bInCity>
:mrgreen:
That is exactly the trouble. The port will move around and will place itself anywhere within the city limits and will end up on the dry land, while the city houses are in the water.
The ports are nothing more than a modified fishery.
What I asked if there is a possibility to have a port that does not move around but stay put!?
Jancsika
PS I have seen the port that you put in Maryland. I tried that too.

User avatar
Rodea2007
Posts: 482
Joined: Mon Jun 11, 2007 3:58 am
Location: Jakarta, Indonesia
Contact:

Re: Ports in the cities?

Post by Rodea2007 » Fri Mar 13, 2009 4:13 am

Jancsika wrote::mrgreen:
If you want to place a port in a city, so you can't make <bIsCoastal>1</bIsCoastal> and should be <bIsCoastal>0</bIsCoastal> and <bInCity>1</bInCity>
:mrgreen:
That is exactly the trouble. The port will move around and will place itself anywhere within the city limits and will end up on the dry land, while the city houses are in the water.
The ports are nothing more than a modified fishery.
What I asked if there is a possibility to have a port that does not move around but stay put!?
Jancsika
PS I have seen the port that you put in Maryland. I tried that too.
As I said before this game full Customize and you can make everything what you want, just depends on your ability to manage its, I will try it, then we will see what i can do for it..... :wink:
Rodea2007 ( http://rodea2007.yolasite.com )
Facebook http://www.facebook.com/rodea2007
Note Book TOSHIBA SATELLITE L645
Processor Inter Core I-3
Memory 8 GB
Harddisk 320 GB
Windows 7 Ultimate 64 Bit

User avatar
Jancsika
Posts: 921
Joined: Thu Nov 02, 2006 3:40 pm
Location: Maryland

Re: Ports in the cities?

Post by Jancsika » Sat Apr 04, 2009 3:44 am

As I said before this game full Customize and you can make everything what you want, just depends on your ability to manage its, I will try it, then we will see what i can do for it.....
The problem is not so much that the Port is jumping around. With careful planning and placing that can be minimised.
They also crash the game (I am talking about Port placed in the City!). They are fine, one even can run tracks and build Stations, but when you click on them, the game crashes.
That happens with both Snoopys and Rodeas ports.
I am just wondering if the green circle has something to do with it?
Does anybody have any ideas?
Jancsika

User avatar
vzbob
Posts: 117
Joined: Fri Nov 10, 2006 8:13 am
Location: Sydney Australia
Contact:

Re: Ports in the cities?

Post by vzbob » Sat Apr 04, 2009 5:03 am

Jancsika wrote:
As I said before this game full Customize and you can make everything what you want, just depends on your ability to manage its, I will try it, then we will see what i can do for it.....
The problem is not so much that the Port is jumping around. With careful planning and placing that can be minimised.
They also crash the game (I am talking about Port placed in the City!). They are fine, one even can run tracks and build Stations, but when you click on them, the game crashes.
That happens with both Snoopys and Rodeas ports.
I am just wondering if the green circle has something to do with it?
Does anybody have any ideas?
Jancsika
The problem is not with the port but with having different mods in the map and there compatibility with other mods. I had the same problem with the port on a map i'm making now and I went through the map and disabled 1 mod at a time until it stopped crashing. Used a different one and it never happened again.
The problem lies with mod incompatibilities.
So do what I did and see what happens.

User avatar
Jancsika
Posts: 921
Joined: Thu Nov 02, 2006 3:40 pm
Location: Maryland

Re: Ports in the cities?

Post by Jancsika » Sat Apr 04, 2009 11:42 pm

Thanks Bobby.
I started to do it but in reverse order. Started with the bare minimum, Mail, grain, beer, brewery and the Port.
I immediately run into a problem.
In order not to CTD I had to add Passengers in the RRT_Goods.XML.
We had this type of a problem with the Side to Side, but there either Mail or Passengers (just one of them) did the trick. Here I had to have both.

The reason I am starting from the bottom up, because there seems to be a problem with the DSC Goods line, but was becoming too complicated to pinpoint it by the way of elimination.

Here is the setup that I am using.
I will post more if and when I find something.
Jancsika
Attachments
UserMaps with Passengers.zip
(4.18 MiB) Downloaded 402 times

User avatar
vzbob
Posts: 117
Joined: Fri Nov 10, 2006 8:13 am
Location: Sydney Australia
Contact:

Re: Ports in the cities?

Post by vzbob » Sun Apr 05, 2009 12:09 am

Jancsika wrote:Thanks Bobby.
I started to do it but in reverse order. Started with the bare minimum, Mail, grain, beer, brewery and the Port.
I immediately run into a problem.
In order not to CTD I had to add Passengers in the RRT_Goods.XML.
We had this type of a problem with the Side to Side, but there either Mail or Passengers (just one of them) did the trick. Here I had to have both.

The reason I am starting from the bottom up, because there seems to be a problem with the DSC Goods line, but was becoming too complicated to pinpoint it by the way of elimination.

Here is the setup that I am using.
I will post more if and when I find something.
Jancsika
Well in the map I am making it has passengers and mail but I found using the Sheep Farm was the cause of my problem with the port I am using so I swapped sheep out for cotton instead. That seems to have solved my problem.

User avatar
Jancsika
Posts: 921
Joined: Thu Nov 02, 2006 3:40 pm
Location: Maryland

Re: Ports in the cities?

Post by Jancsika » Thu Apr 09, 2009 9:12 pm

What I found so frustrating that there appears to be a combination of factors causing the problem and when I crash, just the removal of the offending item does not help. It will still crash after everything was removed.
I have to go back to the last backup, and start fresh.
( I do backup at every step :mrgreen: ) I think it was the combination of the Hotel and some of the DSC containers that did it.
After I stabilized the port, the Hotel caused some crash, so I am using the Casino for Hotel. That seems to be OK.
What a mess, took me 3 days. :roll: :roll:
Jancsika

User avatar
Star Ranger4
Posts: 157
Joined: Thu Oct 18, 2007 2:59 am

Re: Ports in the cities?

Post by Star Ranger4 » Fri Apr 10, 2009 5:31 pm

vzbob wrote: Well in the map I am making it has passengers and mail but I found using the Sheep Farm was the cause of my problem with the port I am using so I swapped sheep out for cotton instead. That seems to have solved my problem.
Hrrm. I wonder if this is what caused Colonia to crash? I think I had both and I kept getting crashes... in the end that was why I worked up Wolf 359, which was Colonia with standard goods.

User avatar
Jancsika
Posts: 921
Joined: Thu Nov 02, 2006 3:40 pm
Location: Maryland

Re: Ports in the cities?

Post by Jancsika » Fri Apr 10, 2009 10:07 pm

Hrrm. I wonder if this is what caused Colonia to crash? I think I had both and I kept getting crashes... in the end that was why I worked up Wolf 359, which was Colonia with standard goods.
The only practical way to design custom maps, to go very slowly, item by item, testig and always have a backup. The backup is important, because as I already indicated, just removing the offending item will not always help. Sometimes some residual effect will stay and it will crash, no matter what.
Jancsika

User avatar
karsten
Posts: 643
Joined: Sun Dec 17, 2006 8:49 pm

Re: Ports in the cities?

Post by karsten » Tue May 26, 2009 8:21 pm

Excellent advice, Jancsika. :D That is exactly how I produced my maps:
  • make a backup
  • add one or two modifications
  • test thoroughly
  • repeat
I keep up to 10 sequential backups at a time (I am currently on backup 24 for my Australia map). Not having a good backup strategy is just a recipe for heartbreak. :cry:

Post Reply